Timber floor sanding Brisbane
People enjoy looking at the decorated timber flooring, and the warmth of the hues and surface can help to raise the value of your home. In the market, there are a variety of classes and timber flooring patterns to choose from.
It is critical that the sanding of the flooring be done by specialists to avoid any damage. If the sanding is done correctly, the warmth of the house will be enhanced, and the polishing will add artistic value. The sanding process should be performed first just before the polishing.
Never attempt to sand the floor by yourself. Always hire experts with prior experience to ensure that the project is completed flawlessly. The strength of your timber flooring will be determined by the type of sanding you choose, such as polyurethane.
Places where people walk frequently, such as hotels and businesses, require a robust and long-lasting finish like polyurethane. The sanding process must be accomplished first, as earlier mentioned.
As a result, sanding must be done by professionals with specialized equipment to polish the flooring. When it comes to sanding your hardwood floors, you must exercise extreme caution. You must be fully informed of their knowledge and experience to judge the degree of service they deliver.
Make inquiries about terms of service and insurance plans. These aspects are crucial for your satisfaction, and if you’re happy with the supplier, you may talk to him about the cost of the sanding procedure.
You must remember all of these factors if you want good sanding for your timber floor; otherwise, you will be unsatisfied and your hard-earned money will be wasted. The sanding procedure is as follows:
- A floor sander (also known as a drum sander) and an edge sander are required to sand timber floors.
- Most shops that rent have both of these, as well as the sandpaper discs you’ll need.
- The floor should be sanded thrice or four times for a flawless finish, starting with forty grit sanding discs and gradually progressing to sixty, eighty, and climaxing at 120.
- Use ear protection when using the floor sander because it is a loud and heavy machine.
A few fundamental recommendations must be adhered to while using a drum sander to achieve satisfactory results:
- Towards the floor, gradually lower the sanding disc.
- Remember to sand towards the grains’ opposite direction
- Begin sanding as soon as the sanding disc makes contact with the floor, and only go ahead.
If the sanding disc is touching the floor, never back up or spin the floor sander.
- Use kerosene to protect the sandpaper from becoming clogged with wood oils by sprinkling it on the floor in front of you regularly.
- Before going from 40 to 60 grit sandpaper, ensure that there aren’t any visible holes that are of nails.
- Using a wood putty that blends with the color of the floor, fill in the gaps. Allow for half an hour for the paint to dry before sanding.
It won’t be possible for the floor sander to sand into the margins of the floor. You’ll need the edge sander for this. For the greatest results, use sixty grit sandpaper discs, followed by eighty grit for a smoother finish.
Employ the services of the professionals at MJS Floorsanding Brisbane for a job that is thoroughly and effectively done.